3mm-10mm Stainless Steel Washers

M3 - M10 304 Stainless Steel External Tooth Lock Washers

M3 - M10 304 Stainless Steel External Tooth Lock Washers Refers to the part that is cushioned between the connected piece and the nut. Generally, a flat metal ring is used to protect the surface of the connected part from being scratched by the nut and disperse the pressure of the nut on the connected part.

Washers are divided into: flat washers-C level, large washers-A and C levels, extra large washers-C level, small washers-A level, flat washers-A level, flat washers-chamfered type-A level, high for steel structure Strength washers, spherical washers, tapered washers, square bevel washers for I-beam steel, square bevel washers for channel steel, standard spring washers, light spring washers, heavy spring washers, internal tooth lock washers, internal serrated lock washers, External tooth lock washers, external serrated lock washers, single-ear stop washers, double-ear stop washers, outer tongue stop washers, and stop washers for round nuts.

Flat washers are generally used in connecting parts, one is soft and the other is hard and brittle. Its main function is to increase the contact area, disperse the pressure, and prevent the soft texture from being crushed. The basic function of the spring of the spring washer is to give a force to the nut after tightening the nut to increase the friction between the nut and the bolt! The material is 65Mn (spring steel), the heat treatment hardness is HRC44～51HRC, and the surface is oxidized.

M3 - M10 304 Stainless Steel External Tooth Lock Washers, circlips are elastic cushions or snap washers

Anti-loosening washer A washer that prevents bolts from loosening. The working principle of the lock washer is very simple. It consists of two washers. The outer side is a radial convex surface, and the inner side is a helical tooth surface. When assembling, the inner helical tooth surfaces are opposed to each other, and the outer radial convex surface is in occlusal state with the contact surfaces at both ends. When the connecting piece is vibrated and the bolt tends to loosen, only the inner helical tooth surfaces of the two washers are allowed to face each other. Mismovement, generating lifting tension, so as to achieve 100% locking

Why Choose us?
1. Our company have more than 15 years experience in the Stainless Steel Screws field.
2. We have Professional experienced engineers, sales and overseas engineers.
3. We have automatically generate machines produce the screws, Bolts, Nuts, Washers and so on .
4. Our high productivity can make sure your quickly delivery time.